Manitowoc QF0800 Spécifications télécharger pdf (Page 80)

80 Part Number 80-1230-9 6/08

Cleaning Procedure

QF400

Step 1 Set the toggle switch to the OFF position.

Open bin door and remove the 2 thumbscrews and

back evaporator panel.

Step 2 To start a cleaning cycle, move the toggle

switch to the CLEAN position. Water will flow through

the water dump valve and down the drain. The flush,

gear motor, speed, dump valve and water solenoid

lights will energize to indicate the ice machine is in the

cleaning mode.

Step 3 Wait about 1 minute or until the dump valve

light de-energizes. Lift the front cover on the reservoir

and add the proper amount of Manitowoc Ice Machine

Cleaner

Step 4 The ice machine will automatically time out

four Flush and Rinse cycles, and then stop. The Flush

light remains energized until the toggle switch is

moved to the OFF position. This entire cycle lasts

approximately 11 minutes.

Caution

Use Manitowoc clear (P/N 000000084) Ice

Machine Cleaner only. It is a violation of Federal

law to use these solutions in a manner

inconsistent with their labeling. Read and

understand all labels printed on bottles before

use.

Model Amount of Cleaner

QF0400 2 oz. (60 ml)

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 307 308

Pas de commentaire

Manitowoc QF0800 Spécifications Page 80