Manitowoc SM50 Spécifications télécharger pdf (Page 16)

Installation Instructions Section 2

2-8

Part Number 000001590

Drain Pump Option

1. Remove top cover screws and slide cover off.

Remove back panel screws and lift panel off.

2. Assemble the outlet tube and vent tube to the drain

pump.

3. Plug the drain pump’s wire assembly into the ice

machine’s wire assembly. Slide drain pump into

cavity.

4. Swap out existing Bin Drain Tube for Bin Drain Tube

packaged with drain pump.

5. Route the vent tube and outlet tube.

6. Reassemble ice machine.

NOTE: See instructions packaged with drain pump for

details. Drain pump available for purchase at

www.compact-ice.com.

Leg Option

1. Remove the leg levelers from the bottom of the ice

machine.

2. Screw the legs into the bottom of the ice machine.

3. Screw the foot of each leg in as far as possible.

4. Move the ice machine to its final position.

5. Level the ice machine to assure that the bin door

closes and seals properly. Use a level on top of the

bin. Turn the base of each foot as necessary to level

the bin.

Adjusting Leg

Warning

Disconnect power to ice machine before proceeding.

Caution

Upon activation, be sure to check all connections for

water leakage.

Screw Leg In

Until Tight

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Pas de commentaire

Manitowoc SM50 Spécifications Page 16