Manitowoc MULTIPLEX 11M Spécifications télécharger pdf (Page 77)

Part Number STH12 9/10 77

PLACING THE SYRUP SYSTEM IN OPERATION

1. Open the CO

gas supply valve at CO

tanks or

bulk tank. Adjust the CO

pressure to 90 psi

(6.2 bar).

2. Open relief valve on top of the carbonator tank for

4 seconds to bleed off air in tank.

3. Verify the water supply to unit is on.

4. Press the switch labeled “Carb A” (and B if

applicable). Allow carbonator to run and cycle

OFF.

5. Press the switch labeled “CIRC A” (and “CIRC B”

if applicable).

6. Activate all vales until a smooth, continuous flow

or carbonated water and non-carbonated water

appear at the valves.

7. Allow at least 1 hour before proceeding to

calibration instructions. You may complete the

sanitizing instructions during this period.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 235 236

Pas de commentaire

Manitowoc MULTIPLEX 11M Spécifications Page 77