Manitowoc QD1092N Spécifications télécharger pdf (Page 37)

Section 4 Maintenance

Part Number 000001759 4-5

Step 16 The ice machine will stop after the sanitize

cycle (approximately 30 minutes). Place the toggle

switch in the OFF position and disconnect power to the

ice machine.

Step 17 Repeat step 6 for hand sanitizing.

Step 18 Mix a solution of sanitizer and warm water.

Step 19 Use 1/2 of the sanitizer/water solution to

sanitize all removed components. Use a cloth or sponge

to liberally apply the solution to all surfaces of the

removed parts or soak the removed parts in the

sanitizer/water solution. Do not rinse parts after

sanitizing.

Step 20 Use 1/2 of the sanitizer/water solution to

sanitize all foodzone surfaces of the ice machine and bin

(or dispenser). Use a cloth or sponge to liberally apply

the solution. When sanitizing, pay particular attention to

the following areas:

• Side walls

• Base (bottom of the water trough)

• Interior of water trough

• Evaporator cells and evaporator plastic parts -

including top, bottom and sides

• Bin or dispenser

• Ice machine top cover

Do not rinse the sanitized areas. Remove the water

trough drain plug and wipe with solution. When the

sanitizer solution has drained from the trough, reinstall

the water trough drain plug.

Step 21 Install the removed parts, restore power and

place the toggle switch in the ICE position.

Warning

Disconnect the electric power to the ice machine at

the electric service switch box..

Solution Type Water Mixed With

Sanitizer 23 l 120 ml sanitizer

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Pas de commentaire

Manitowoc QD1092N Spécifications Page 37