Manitowoc MARINE MODEL S1800 Spécifications télécharger pdf (Page 15)

Section 3 Ice Machine Operation

3-3

Operational Checks

GENERAL

Your Manitowoc ice machine was factory-operated

and adjusted before shipment. Normally, a newly

installed ice machine does not require any

adjustment.

To ensure proper operation, always follow these

Operational Checks when starting the ice machine:

• for the first time

• after a prolonged out of service period

• after cleaning and sanitizing

Routine adjustments and maintenance procedures

outlined in this manual are not covered by the

warranty.

WATER LEVEL

The water level sensor is set to maintain the proper

water level above the water pump housing. The water

level is not adjustable.

If the water level is incorrect, check the water level

probe for damage (probe bent, etc.). Repair or replace

the probe as necessary.

Water Level Probe

ICE THICKNESS CHECK

After a harvest cycle, inspect the ice cubes in the ice

storage bin. The ice thickness probe is factory-set to

maintain an ice bridge of 1/8 inch (3.2mm). If an

adjustment is needed, follow the steps below.

1. Turn the ice thickness probe adjustment screw

clockwise for a thicker ice bridge, or

counterclockwise for a thinner ice bridge.

IMPORTANT

It is normal for cubes to have a slight dimple. This

is a normal characteristic associated with

Manitowoc’s unique shape.

Ice Thickness Adjustment

2. Make sure the ice thickness probe wire and

bracket do not restrict movement of the probe.

SV1208

SV1616

1/8” ICE

THICKNESS

DJUSTING

SCREW

WATER

PUMP

WATER LEVEL

SENSOR PROBE

WATER PUMP

IMPELLER HOUSING

PUMP

OUTLET

110°

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Manitowoc MARINE MODEL S1800 Spécifications Page 15

Commentaires sur ces manuels

Produits connexes et manuels pour Les fabricants de glaçons Manitowoc MARINE MODEL S1800